Conical Seat Stud Conversion Kit | ES2806944

Make changing out your wheels faster and easier with a stud conversion.  This kit includes:

• 17mm Conical Seat Lug Nuts (20)
• 56mm Wheel Studs (10)
• 70mm Wheel Studs (10)

  This gives you permanent wheel hangers and saves you time!  Simply screw in the supplied studs and you are in business.

 Why use wheel studs instead of wheel bolts?

• Because, race car.
• Wheel studs are required by many racing sanctioning bodies because they are a safer way to ensure proper wheel-to-hub contact.
• Wheel studs allow the use of different length spacers. Lug bolts require custom lengths per spacer application.
• Installing wheels using wheel studs is much easier than using wheel bolts, as the studs will locate the wheel while the nuts secure the wheel in place.
• Wheel studs stay in the hub. The constant installation and removal of wheel bolts can cause accelerated wear on the bolt holes in the hubs requiring costly repairs.

*Note: Thread-locking compound is recommended during installation.  Studs should be torqued to 15Nm.  These studs may be used with spacers up to 10mm and 20mm.

**Please note: The threaded end going into the hub is 15mm long. Be sure to measure for clearance behind the hub to make sure there is no interference.