Wheel spacers increase wheel offset to improve vehicle appearance and handling. These discs, with hub and wheel bolt holes, fit between the wheel and hub to push the wheels outward. This pair of 4mm spacers was manufacture from high strength steel, allowing you to achieve the look you want with quality parts. Wheel spacers from ECS Tuning are available in thicknesses from 3-20mm, to widen track, improve cornering, and provide extra room for altered suspension and brake components. Note: Wheel spacers 3mm to 8mm do not have raised centering lips. Please be sure your wheel hub protrudes far enough through the thinner spacers to center the rim. Please Note: Wheel Spacers that measure three millimeters to eight millimeters might not allow for proper wheel fitment, as they do not sustain enough space for the lip of the wheel to attach to the wheel hub. If you proceed to run these spacers, you might perceive wheel vibrations, especially on the front of your vehicle, as vibrations are more prominent in that area. Please, before ordering, measure to ensure that you have enough hub remaining after the spacer is in place. ECS recommends at least five millimeters for appropriate wheel hub to wheel mounting. We recognize that on some vehicles this might not be possible, so we recommend running our spacers with a hub centric ring to guarantee proper wheel fitment. Adhering to these steps will ensure a vibration free ride in your vehicle.
