On orders over $149 within the contiguous U.S. only and on orders over $399 within Canada.
There are many items in your vehicle's suspension system that contribute to the quality of the ride as well as the handling characteristics. Among these components are the bushings, tie rod ends, and the ball joints.
If you have started to notice a clunking sound when driving over bumps, accelerating or stopping, or sloppy handling and a rough ride, then failing ball joints and bushings could be to blame.
Since the main material that makes up a bushing is rubber, over the years it will wear out, due not only to the constant stress of the vehicle's movements, but also because of its constant exposure to the elements. Ball joints will wear out after years of use, or from damaged boots allowing outside contaminants inside the joint and causing it to rust.
In order to replace the bushings and/or ball joints, the control arm must be removed, that is why the experts at ECS Tuning have built this kit of Lemforder and Meyle components, so that you can replace all of your worn out suspension bushings and ball joints at the same time.
This kit includes everything you need to replace the upper control arms, lower ball joints, tie rods, drag link, bushings, even an intermediate arm repair kit. It is highly recommended that you have your vehicle aligned at a qualified repair facility after this type of repair.