Audi B8/B8.5 A4 And S4 Front And Rear Adjustable Sway Bar Kit

If you?re looking to improve the handling of your Audi B8, this is the best place to start! These cars have a lot more body roll than desired, and the stock sway bars don't quite do enough for most?owners to be satisfied. Engineered, designed, and tested inhouse at ECS Tuning, you know these sway bars are built to last with the highest quality.

Larger diameter sway bars have a higher torsional spring rate which helps resist excessive body roll. By eliminating the excessive body roll and changing the stiffness of the sway bars front to rear, we can improve handling characteristics by reducing understeer and keep the tire in full contact with the ground.? By upgrading to ECS Tuning Adjustable?Front and Rear Sway Bars, you will experience less body roll, and an?improvement to the handling characteristics of your vehicle, with virtually no sacrifice in ride quality.?The sway bars are?also adjustable, and allow for a ?softer? setting, or a ?stiffer? setting, depending on your driving preferences.

?

Adjustable Front Sway Bar:?

• Design:

  • 1.25? (31.75mm) OD, 0.120? (3.05mm) wall DOM (hollow) tubing

  • Black powder coated for corrosion resistance

  • 80A Durometer custom polyurethane greasable bushings reduces flex at mount as compared to OEM rubber

  • Grooved bushing inside diameter for improved grease retention

  • Black anodized 6061T6 billet brackets with check valve grease port

  • Complete with ECS Tuning adjustable end links

  • Fully reversible back to factory components

• Performance:

  • 38% stiffness increase on ?soft? setting

  • 48% stiffness increase on ?stiff? setting

  • Reduced body roll without excessive change in dynamic F/R balance

  • Increased cornering speed and response time

Adjustable Rear Sway Bar:?

• Design:

  • 1.00? (24.4mm) OD, solid spring steel bar

  • Black powder coated for corrosion resistance

  • 80A Durometer custom polyurethane greasable bushings reduces flex at mount as compared to OEM rubber

  • Grooved bushing inside diameter for improved grease retention

  • Black anodized 6061T6 billet brackets with check valve grease port

  • Fully reversible back to factory components

• Performance:

  • 125% stiffness increase on ?soft? setting

  • 150% stiffness increase on ?stiff? setting

  • Reduced body roll without excessive change in dynamic F/R balance

  • Increased cornering speed and response time