Audi B8 Q5/SQ5 C7 A6/S6 A7/S7 Rear Adjustable Sway Bar Kit

If you’re looking to improve the handling of your Audi Q5/SQ5 or C7 A6/S6 A7/S7, this is the best place to start! These cars have a lot more body roll than desired, and the stock sway bars don't quite do enough for most owners to be satisfied.

Larger diameter sway bars have a higher torsional spring rate which helps resist excessive body roll. By eliminating the excessive body roll and changing the stiffness of the sway bars front to rear, we can improve handling characteristics by reducing understeer and keep the tire in full contact with the ground.  By upgrading to the ECS Tuning Adjustable Rear Sway Bar, you will experience less body roll, and an improvement to the handling characteristics of your vehicle, with virtually no sacrifice in ride quality. The sway bars are also adjustable, and allow for a “softer” setting, or a “stiffer” setting, depending on your driving preferences.

Adjustable Rear Sway Bar: 

• Design:

  • 1.00” (25.4mm) OD, solid spring steel bar

  • Black powder coated for corrosion resistance

  • 80A Durometer custom polyurethane greaseable bushings - reduces flex at mount as compared to OEM rubber

  • Grooved bushing inside diameter for improved grease retention

  • Black anodized 6061-T6 billet brackets with check valve grease port

  • Fully reversible back to factory components

• Performance:

  • 194% stiffness increase on “soft” setting

  • 243% stiffness increase on “stiff” setting

  • Reduced body roll without excessive change in dynamic F/R balance

  • Increased cornering speed and response time

Recommended hardware for end links:  ES#10150 and ES#471506