Do your stock wheels look sucked in? The H&R Flush Kit was researched and assembled to bring your OEM 19x8.0" ET50 wheels out for the best fitment and look. Compatible with OEM "Adelaide" or other OEM wheels with identical offset and width. This kit will give your car the flush look it was missing from the factory.
With the wheels pushed out, you may also experience handling benefits by improving the level of grip that your car has in the corners.
This kit provides the necessary hub-centric wheel spacers and lug bolts to bring your stock wheels even with the fenders, providing the "flush" look.
Included in the kit are 10mm - front and 15mm - rear spacers with 37mm - front and 45mm - rear, black ball seat wheel bolts.
*Photos shown on a MK8 GTI Autobahn with 19" wheels on stock suspension.
**Please note: This kit is for aggressive enthusiast fitment. Under aggressive cornering there is slight contact between front tires and the front fender liners.
Pro Tip - When installing the spacers put a light coating on the center bore of the hub and the mating surfaces to avoid the spacers getting stuck to the back of the wheel or to the rotor later on down the road. Anti seize is ES#2162832
ECS Tuning
