Stud Conversion Kit - 56mm - Half Set

This kit includes:

• 56mm Wheel Studs (10)

? This gives you permanent wheel hangers and saves you time!  Simply screw in the supplied studs and you are in business.

 Why use wheel studs instead of wheel bolts?

• Because, race car.
• Wheel studs are required by many racing sanctioning bodies because they are a safer way to ensure proper wheel-to-hub contact.
• Wheel studs allow the use of different length spacers. Lug bolts require custom lengths per spacer application.
• Installing wheels using wheel studs is much easier than using wheel bolts, as the studs will locate the wheel while the nuts secure the wheel in place.
• Wheel studs stay in the hub. The constant installation and removal of wheel bolts can cause accelerated wear on the bolt holes in the hubs requiring costly repairs.

*Note: Thread-locking compound is recommended during installation.  Studs should be torqued to 15Nm. These studs may be used with spacers up to 10mm and 20mm.

**Please note: The threaded end going into the hub is 15mm long. Be sure to measure for clearance behind the hub to make sure there is no interference.