VWR Front Brake Kit, Standard Bell, 352mm Disc and Red 6-Pot Calipers Golf 7

The lightweight Monoblock construction is usually reserved for the highest-specification motorsport kits, being vastly stiffer and lighter than the original calipers, coming in at almost half the weight of the original for significant unsprung mass savings.  The 6-piston front calipers feature pistons of differing diameters to ensure even pressure distribution across the whole pad surface. The calipers are forged from lightweight aluminum and designed to house large brake pads. The forged design provides intrinsic compressive stresses to help combat the negative effects of caliper flex, allowing improved force distribution and reduced vibration. Each unit features a thin caliper profile to aid in wheel clearance and weight savings while not sacrificing structural integrity, even in the most demanding environments.
. Meanwhile, a much bigger, fully-floating disc and enlarged pad area gives greater heat capacity, thus reducing the effect of fade, whilst the braided steel brake lines reduce the compliance in the braking system to ensure firm pedal response under all conditions. 

 

To reduce brake fade, significantly larger 360mm x 32mm ventilated and grooved 2-piece disc faces provide dramatically improved heat dissipation to give better braking, both in terms of pedal response and resistance to fade under hard use.  The ventilated design effectively dissipates heat while the grooved surfaces clear gases released from the pads when hot. The 2-piece design reduces unsprung mass through the use of a lightweight aluminum bell, as is common in high-level motorsport brake applications.

Developed solely for VWG cars, this is simply the best Big Brake Upgrade available for your car.

 

OVERVIEW OF THE KIT:

• 6-Piston, Light Weight, Low Profile, Red/Black/Blue Forged Aluminum Calipers
• 360mm x 32mm 2-piece, ventilated, grooved Discs
• Aluminum Bells compatible with unique VWR Interlocking Hub Adaptors
• Aluminum Mounting Brackets with Racingline logo
• Braided Stainless Flexible Brake Lines
• Performance Street Pads, designed in a Standard Size
• All required Mounting Hardware Included
• Optional VWR Interlocking 5mm, 7mm and 10mm Hub Adaptors
• Minimum 18in Wheels
• Caliper Design specific for VWG Master Cylinders
• Reduced unsprung mass with a Total Weight of 29 LBS Per Side