Wheel Stud Conversion Kit - M12x1.5 With conical Seat Lug Nuts - set of 10

Make changing out your wheels faster and easier with a wheel stud conversion kit. 

This kit includes:

• 17mm Conical Seat Lug Nuts (M12x1.5mm) (x10)
• M12x1.5mm/56mm Overall Length (15mm/48mm) Stud Adapters (x10)

This gives you permanent wheel hangers and saves you time!  Wheel studs alleviate any worry about measuring wheel bolts. Just install your new studs into the adapter and secure your new wheels.

 Why use wheel studs instead of wheel bolts?

• Because, race car.
• Wheel studs are required by many racing bodies because they are a safer way to ensure proper wheel-to-hub contact.
• Wheel studs allow the use of different thickness wheel hubs. Lug bolts require custom lengths per wheel hub application.
• Installing wheels using wheel studs is much easier than using wheel bolts, as the studs will locate the wheel while the nuts secure the wheel.

*Note: Thread-locking compound is recommended during installation.  Studs should be torqued to 15Nm.  

**Note: For use with ECS wheel adapters only!